Printing Method Thermal transfer
Resolution 300dpi
Printing Speed Tubes: High speed: 40mm/sec.
Middle speed: 25mm/sec.
Low speed: 18.5mm/sec.
Labels: High speed: 40mm/secs.
Middle / Low speed: 25mm/secs.
Output Rate High speed: About 42pcs./min.
Middle speed: About 35pcs./min.
Low speed: About 30pcs./min.
Printing 20mm tubes, 5 full-size characters, consecutive print mode, half-cutting.
Ink Ribbons (Exclusive cassette) Black: 100m
White: 85m
Black for Marking Strip: 40m
Character Sizes 1.3mm (only full-width available), 2mm, 3mm, 6mm (full-width, half-width available
for each)
Input Modes Alphanumeric, symbol input
Display LCD Graphic (160 x 64 dots)
Display Capacity 10 characters/line x 2 lines (full-width) or
20 characters/line x 2 lines (half-width) (3 lines editing is possible.)
Built-in Memory Print-data: Approx. 2,500 characters
Files: Approx. 15,000 characters
Service life of internal backup battery for data storage: About 5 years Media Cutting Method Automatic full-cutting, Automatic half-cutting Power Supply Exclusive AC Adapter
Input voltage: AC 100V - 240V 50 / 60Hz
PC Interface USB2.0 Full-Speed, Exclusive PC Connection Kit (Included)
Operating Environment 15°C - 32.5°C (59°F - 90.5°F),
10% - 85% RH
Range is lowered to 5°C (41°F) with Tube Warmer option installed
Storage Environment 5°C - 35°C (41°F - 95°F),
10% - 90% RH
Dimensions (W x D x H) 250 x 300 x 85mm (9.8 x 11.8 x 3.4in.)
Weight 2kg (4.4lb.) (printer only)
Tube PVC tube, φ 2.5 - 6.5mm, 0.5mm thick
Tube attachment option is required (Other tubes should be tested for printing.)
Label Tape (Exclusive cassettes (White, Yellow, Silver)) Width: 6mm, 9mm, 12mm
Length: 30m (Silver: 27m)
Segment length can be set to 2mm through 150mm
Wrap Around Tape: Exclusive cassettes Print area only: White
Other areas: Transparent
Take-up length: 8m
Length: 33mm
Width: 6 - 150mm (depends on cut setting)
Marking Strip Specified thickness 0.5mm
Plates of other thickness should be tested for printing
Width: 8mm, 8.5mm, 9mm, 9.5mm, 10mm
Plate Attachment option is required
Exclusive ribbon cassette is required
Manual cut only
Heat Shrink Tube Shrink tube: φ 3.0 - 6.4mm
Tube attachment option is required.
(Other tubes should be tested for printing.)
4mm ID Strip (Exclusive Cassette (White, Yellow)) Width: 4mm
Length: 5m
Segment length can be set to 8mm through 150mm