Fargo DTC 4500E Card Printer in Khera-Kalan
Barcode vault provides Fargo DTC 4500E Card Printer at the best prices. With Fargo DTC 4500E will get professional quality, full-color credentials. This printer is suitable for medium to large organizations, schools, and government offices that need long term card printing and encoding solutions.
  • Print Method Dye-sublimation / resin thermal transfer Resolution 300 dpi (11.8 dots/mm) continuous tone Colors Up to 16.7 million / 256 shades per pixel Print Ribbon Options Full-color with resin black and overlay panel, YMCKO*, 500 prints, more economical and eco-friendly refill ribbon for the cartridge (ECO only) Full-color half-panel with resin black and overlay panel, YMCKO*, 850 prints, ECO only Full-color with two resin black panels and overlay panel, YMCKOK*, 500 prints, ECO only Full-color with fluorescing, resin black and overlay panel, YMCFKO*, 500 prints, ECO only Full-color with fluorescing, two resin black panels and overlay panel, YMCFKOK*, 400 prints, ECO only Full-color with two resin black panels and overlay panel, YMCKK*, 500 prints, ECO only Resin black and overlay panel, KO*, 1250 prints, ECO only Dye-sublimation black and overlay panel, BO*, 1250 prints, ECO only Resin black (standard and premium), 3000 prints, ECO only Resin green, blue, red, white, silver, and gold, 2000 prints, ECO only Rewrite technology - no ribbon required Print Speed** 6 seconds per card (K*); 8 seconds per card (KO*); 16 seconds per card (YMCKO*); 24 seconds per card (YMCKOK*) Accepted Standard Card Sizes CR-80 (3.375˝ L x 2.125˝ W / 85.6 mm L x 54 mm W); CR-79 Adhesive Back (3.313˝ L x 2.063˝ W / 84.1 mm L x 52.4 mm W) Print Area CR-80 edge-to-edge (3.36˝ L x 2.11˝ W / 85.3 mm L x 53.7 mm W); CR-79 (3.3˝ L x 2.04˝ W / 83.8 mm L x 51.8 mm W) Accepted Card Thickness Print only: .009˝ - .040˝ / 9 mil - 40 mil / .229 mm - 1.016 mm; print / lamination: .030˝ - .040˝ / 30 mil - 40 mil / .762 mm - 1.02 mm Accepted Card Types PVC or polyester cards with polished PVC finish; monochrome resin required for 100% polyester cards; optical memory cards with PVC finish; rewrite Input Hopper Card Capacity Dual-input card hopper (200 cards) Output Hopper Card Capacity Up to 100 cards (.030˝ / .762 mm) Reject Hopper Card Capacity Up to 100 cards (.030˝ / .762 mm) - same-side input/output card hopper or lamination module required Card Cleaning Card cleaning roller integrated into ribbon cartridge; cleaning roller is automatically replaced with each ribbon change Memory 32 MB RAM Software Drivers Windows® XP / Vistaâ„¢ (32 bit & 64 bit) / Server 2003, 2008, 2012 / Windows® 7, 8 & 10 (32 & 64 bit), Mac OS X 10.5/10.6/10.7/10.8/10.9/10.10 Linux*** Interface USB 2.0 and Ethernet with internal print server Operating Temperature 65° to 80° F / 18° to 27° C Humidity 20–80% non-condensing Dimensions Single-sided printer: 9.8˝ H x 18.1˝ W x 9.2˝ D / 249 mm H x 460 mm W x 234 mm D Dual-sided printer: 9.8˝ H x 18.7˝ W x 9.2˝ D / 249 mm H x 475 mm W x 234 mm D Printer + lam: 18.9˝ H x 18.7˝ W x 9.2˝ D / 480 mm H x 475 mm W x 234 mm D Weight Single-sided printer: 9 lbs / 4.1 Kg; dual-sided printer: 11 lbs / 5 Kg; printer + lam: 20 lbs / 9.1 Kg Agency Listings Safety: UL 60950-2, CSA C22.2 (60950-07), and CE; EMC: FCC Class A, CE (EN 55022 Class A, EN 55024), CCC, BSMI, KC Environmental Features GreenCircle Certified card printer (base models only without encoders and lamination module) and refillable supply cartridges (ECO) Supply Voltage 100-240Vac, 50-60Hz, 1.6 Amps max. Supply Frequency 50 Hz / 60 Hz Warranty Printer – three years; Printhead – three years, unlimited pass with UltraCard® Encoding Options (HID Encoders) Supported smart card and magnetic stripe technologies: 125 kHz (HID Prox) reader; 13.56 MHz (iCLASS® Standard/SE/SR/Seos, MIFARE Classic®, MIFARE Plus®, MIFARE DESFire®, MIFARE DESFire® EV1, ISO 14443 A/B, ISO 15693) read/write encoder; contact smart card encoder reads from and writes to all ISO7816 1/2/3/4 memory and microprocessor smart cards (T=0, T=1) as well as synchronous cards; ISO magnetic stripe encoding, dual high- and low-coercivity, tracks 1, 2 and 3 Supported Access Control Credential Programming iCLASS® Standard/SE/SR/Seos, MIFARE Classicâ„¢, MIFARE DESFire® EV1, HID Prox Options Single wire Ethernet and USB 2.0 interface for inline printing and encoding (note: single wire Ethernet encoding is only available for iCLASS®, MIFARE®, and contact smart card encoding); Ethernet-enabled printer supports wireless accessory; dual-sided printing module; same-side input/output card hopper; locking card input/output hopper; smart card encoding modules (contact/contactless); magnetic stripe encoding module; printer cleaning kit; Ethernet with internal print server; secure proprietary consumables system; Third-party encoder installation kit for FeliCaâ„¢, Calypso, LEGIC® Software Swift IDâ„¢ embedded badging application, FARGO Workbenchâ„¢ diagnostic utility with Color Assistâ„¢ spot-color matching Display User-friendly, SmartScreenâ„¢ graphical display Printer Security Printer access password protected
  • Healthcare icon Fargo DTC 4500E Card Printer can be used in Health care Industry
    Retails icon Fargo DTC 4500E Card Printer can be used on Retail Stores
    Logistics icon Fargo DTC 4500E Card Printer Mostly used in Logistics Industry for Asset Managemnet and Tracking
    Manufacturing icon Manufacturing Industry uses Fargo DTC 4500E Card Printer
    Government icon Fargo DTC 4500E Card Printer used in various Government Sectors
    Travel & Leisure icon Fargo DTC 4500E Card Printer for Travel & Leisure
    Special Materials icon Fargo DTC 4500E Card Printer for Special Materials







Select Product Line